Effects of coolant pH on crud deposition behavior on fuel cladding tube under subcooled nucleate boiling condition in high temperature pressurized water

IF 2.8 2区工程技术 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY

Journal of Nuclear Materials Pub Date : 2024-10-10 DOI:10.1016/j.jnucmat.2024.155454

Zihao Lin , Ziyu Zhang , Jibo Tan , Xinqiang Wu

引用次数: 0

Abstract

The effects of coolant pH on the crud deposition behavior on the Zr alloy and the FeCrAl fuel cladding tubes under subcooled nucleate boiling condition were investigated. With the increase of coolant pH, the coverage rate and thickness of crud on the surfaces of both the Zr alloy and the FeCrAl fuel cladding tubes showed a decreasing trend. The solubility of crud compositions was reduced due to the increase of coolant pH, which resulted in the inhibition of the crud deposition process caused by SNB condition. Consequently, the elevated coolant pH value reduced the amount of crud on the surface of the fuel cladding tube.

查看原文本刊更多论文

冷却剂 pH 值对高温加压水中过冷核沸腾条件下燃料包壳管上渣滓沉积行为的影响

研究了在过冷核沸腾条件下，冷却剂 pH 值对 Zr 合金和 FeCrAl 燃料包壳管上污泥沉积行为的影响。随着冷却剂 pH 值的增加，锆合金和铁铬铝燃料包壳管表面的覆盖率和污泥厚度均呈下降趋势。由于冷却液 pH 值升高，沉积物成分的溶解度降低，从而抑制了 SNB 条件下的沉积物沉积过程。因此，冷却剂 pH 值的升高减少了燃料包壳管表面的渣量。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Nuclear Materials 工程技术-材料科学：综合

CiteScore

5.70

自引率

25.80%

发文量

601

审稿时长

63 days

期刊介绍： The Journal of Nuclear Materials publishes high quality papers in materials research for nuclear applications, primarily fission reactors, fusion reactors, and similar environments including radiation areas of charged particle accelerators. Both original research and critical review papers covering experimental, theoretical, and computational aspects of either fundamental or applied nature are welcome. The breadth of the field is such that a wide range of processes and properties in the field of materials science and engineering is of interest to the readership, spanning atom-scale processes, microstructures, thermodynamics, mechanical properties, physical properties, and corrosion, for example. Topics covered by JNM Fission reactor materials, including fuels, cladding, core structures, pressure vessels, coolant interactions with materials, moderator and control components, fission product behavior. Materials aspects of the entire fuel cycle. Materials aspects of the actinides and their compounds. Performance of nuclear waste materials; materials aspects of the immobilization of wastes. Fusion reactor materials, including first walls, blankets, insulators and magnets. Neutron and charged particle radiation effects in materials, including defects, transmutations, microstructures, phase changes and macroscopic properties. Interaction of plasmas, ion beams, electron beams and electromagnetic radiation with materials relevant to nuclear systems.