{"title":"Design of novel electrochemical sensor functionalized with green nanoparticles for tetracycline monitoring","authors":"Manahil Babiker Elamin","doi":"10.1002/pat.6543","DOIUrl":null,"url":null,"abstract":"Increasing the release of antibiotics in particular tetracycline in the environment is become one of the most concerns that threat human and animals' health. Regarding their low cost, sensitivity, portability, electrochemical sensors have received attention for tetracycline monitoring. With a nanostructure, diverse active functional sites, and good conductivity, green nanoparticles are considered now as an attractive material for sensors design. The objective of the present paper is then the design of electrochemical sensor functionalized with green nanoparticles based on gum Arabic for tetracycline detection. The green nanoparticles are synthesized by direct reduction of silver nanoparticle with gum Arabic polymer. The intrinsic properties of the obtained nanoparticles are examined using different techniques namely UV–Vis absorption (UV), X‐ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric TGA. To follow up, the sensor modification as well as tetracycline detection, cyclic voltammetry (CV) and square wave voltammetry are carried out. Correlation between the different results have demonstrated good dispersion and homogeneity of green nanoparticles, with good applicability in electrochemical measurements. In fact, the sensor has demonstrated wide concentrations range from 0.1 to 1250 nM with a limit of detection in the order of 0.056 nM, lower than those reported in the literature. The selectivity test, investigated against a various interfering with similar structure to tetracycline, have proven a good discrimination between all molecules. In addition, the sensor was successfully applied to real samples, and the found recovery rates are ranging from 90.4% to 106.9%. The obtained results confirm that green nanoparticles based on gum Arabic could commercially be viable for next generation of electrochemical sensor for tetracycline detection, and also could be applied for the detection of the variety of pharmaceutical pollutants in the environment.","PeriodicalId":20382,"journal":{"name":"Polymers for Advanced Technologies","volume":null,"pages":null},"PeriodicalIF":3.1000,"publicationDate":"2024-08-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymers for Advanced Technologies","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1002/pat.6543","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
引用次数: 0
Abstract
Increasing the release of antibiotics in particular tetracycline in the environment is become one of the most concerns that threat human and animals' health. Regarding their low cost, sensitivity, portability, electrochemical sensors have received attention for tetracycline monitoring. With a nanostructure, diverse active functional sites, and good conductivity, green nanoparticles are considered now as an attractive material for sensors design. The objective of the present paper is then the design of electrochemical sensor functionalized with green nanoparticles based on gum Arabic for tetracycline detection. The green nanoparticles are synthesized by direct reduction of silver nanoparticle with gum Arabic polymer. The intrinsic properties of the obtained nanoparticles are examined using different techniques namely UV–Vis absorption (UV), X‐ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric TGA. To follow up, the sensor modification as well as tetracycline detection, cyclic voltammetry (CV) and square wave voltammetry are carried out. Correlation between the different results have demonstrated good dispersion and homogeneity of green nanoparticles, with good applicability in electrochemical measurements. In fact, the sensor has demonstrated wide concentrations range from 0.1 to 1250 nM with a limit of detection in the order of 0.056 nM, lower than those reported in the literature. The selectivity test, investigated against a various interfering with similar structure to tetracycline, have proven a good discrimination between all molecules. In addition, the sensor was successfully applied to real samples, and the found recovery rates are ranging from 90.4% to 106.9%. The obtained results confirm that green nanoparticles based on gum Arabic could commercially be viable for next generation of electrochemical sensor for tetracycline detection, and also could be applied for the detection of the variety of pharmaceutical pollutants in the environment.
期刊介绍:
Polymers for Advanced Technologies is published in response to recent significant changes in the patterns of materials research and development. Worldwide attention has been focused on the critical importance of materials in the creation of new devices and systems. It is now recognized that materials are often the limiting factor in bringing a new technical concept to fruition and that polymers are often the materials of choice in these demanding applications. A significant portion of the polymer research ongoing in the world is directly or indirectly related to the solution of complex, interdisciplinary problems whose successful resolution is necessary for achievement of broad system objectives.
Polymers for Advanced Technologies is focused to the interest of scientists and engineers from academia and industry who are participating in these new areas of polymer research and development. It is the intent of this journal to impact the polymer related advanced technologies to meet the challenge of the twenty-first century.
Polymers for Advanced Technologies aims at encouraging innovation, invention, imagination and creativity by providing a broad interdisciplinary platform for the presentation of new research and development concepts, theories and results which reflect the changing image and pace of modern polymer science and technology.
Polymers for Advanced Technologies aims at becoming the central organ of the new multi-disciplinary polymer oriented materials science of the highest scientific standards. It will publish original research papers on finished studies; communications limited to five typewritten pages plus three illustrations, containing experimental details; review articles of up to 40 pages; letters to the editor and book reviews. Review articles will normally be published by invitation. The Editor-in-Chief welcomes suggestions for reviews.