{"title":"Physical and mechanical characterization of solid waste collected from rural areas of China: Experimental study","authors":"","doi":"10.1016/j.psep.2024.09.038","DOIUrl":null,"url":null,"abstract":"<div><p>To support the landfill design and waste management in rural areas of China, solid waste covering eight provisional regions was collected and tested in the laboratory to characterize its physical properties (composition, moisture content, specific gravity, dry unit weight) and mechanical properties (compressibility and shear strength). The results show that, compared with solid wastes from urban areas (MSW), solid waste from rural areas (RSW) comprised a much lower content of soil-like, gravel, and inert waste and a significantly higher content of combustible waste, thereby yielding a much lower specific gravity and dry unit weight. Similar to MSW, the compression index of RSW correlated well with its physical properties. However, its strength properties displayed divergence. Notably, the friction angle <em>φ</em>' of RSW remained relatively consistent, ranging from 28.4° to 30.9°. This narrow range is attributed to RSW's higher combustible-to-inert (CI) ratio compared to MSW. The cohesion intercept <em>c</em>' of RSW ranged from 13.5 to 24.9 kPa, showing a positive correlation with the fiber content without considering contribution from paper waste. This finding combined with data from the literature further revealed that the trend of increasing cohesion intercept with increasing fiber content became weakened over time. Relationships between <em>φ</em>' and c' versus C/I for RSW observed in this study will serve as an extension to the existing finding reported for MSW in the literature, i.e., for predominately combustible waste with C/I exceeding 10, constant values of strength parameters (i.e., moderate values <em>φ</em>' = 30°, <em>c</em>' = 20 kPa) are recommended. The results of this study are useful for the capacity design and slope stability analysis of landfills as well as waste recycle and reuse, ensuring a sustainable development of environment in China.</p></div>","PeriodicalId":20743,"journal":{"name":"Process Safety and Environmental Protection","volume":null,"pages":null},"PeriodicalIF":6.9000,"publicationDate":"2024-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Process Safety and Environmental Protection","FirstCategoryId":"93","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0957582024011704","RegionNum":2,"RegionCategory":"环境科学与生态学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0
Abstract
To support the landfill design and waste management in rural areas of China, solid waste covering eight provisional regions was collected and tested in the laboratory to characterize its physical properties (composition, moisture content, specific gravity, dry unit weight) and mechanical properties (compressibility and shear strength). The results show that, compared with solid wastes from urban areas (MSW), solid waste from rural areas (RSW) comprised a much lower content of soil-like, gravel, and inert waste and a significantly higher content of combustible waste, thereby yielding a much lower specific gravity and dry unit weight. Similar to MSW, the compression index of RSW correlated well with its physical properties. However, its strength properties displayed divergence. Notably, the friction angle φ' of RSW remained relatively consistent, ranging from 28.4° to 30.9°. This narrow range is attributed to RSW's higher combustible-to-inert (CI) ratio compared to MSW. The cohesion intercept c' of RSW ranged from 13.5 to 24.9 kPa, showing a positive correlation with the fiber content without considering contribution from paper waste. This finding combined with data from the literature further revealed that the trend of increasing cohesion intercept with increasing fiber content became weakened over time. Relationships between φ' and c' versus C/I for RSW observed in this study will serve as an extension to the existing finding reported for MSW in the literature, i.e., for predominately combustible waste with C/I exceeding 10, constant values of strength parameters (i.e., moderate values φ' = 30°, c' = 20 kPa) are recommended. The results of this study are useful for the capacity design and slope stability analysis of landfills as well as waste recycle and reuse, ensuring a sustainable development of environment in China.
期刊介绍:
The Process Safety and Environmental Protection (PSEP) journal is a leading international publication that focuses on the publication of high-quality, original research papers in the field of engineering, specifically those related to the safety of industrial processes and environmental protection. The journal encourages submissions that present new developments in safety and environmental aspects, particularly those that show how research findings can be applied in process engineering design and practice.
PSEP is particularly interested in research that brings fresh perspectives to established engineering principles, identifies unsolved problems, or suggests directions for future research. The journal also values contributions that push the boundaries of traditional engineering and welcomes multidisciplinary papers.
PSEP's articles are abstracted and indexed by a range of databases and services, which helps to ensure that the journal's research is accessible and recognized in the academic and professional communities. These databases include ANTE, Chemical Abstracts, Chemical Hazards in Industry, Current Contents, Elsevier Engineering Information database, Pascal Francis, Web of Science, Scopus, Engineering Information Database EnCompass LIT (Elsevier), and INSPEC. This wide coverage facilitates the dissemination of the journal's content to a global audience interested in process safety and environmental engineering.