Experimental and numerical investigations on rate-dependent fracture behavior of concrete-rock interface

Abstract

To ensure the safety and stability of the concrete gravity dams built in the seismic regions, this study investigated the rate-dependent fracture behavior of the concrete-rock interfaces with different roughness degrees. Firstly, direct tensile tests and three-point bending tests were conducted to measure the mechanical and fracture properties of the concrete-rock interface with three roughness degrees, i.e. the 4 × 4 interface, natural interface, and 7 × 7 interface, and under four strain rates, i.e. 10^-5/s, 10^-4/s, 10^-3/s, and 10^-2/s. By employing the fictitious crack model and initial fracture toughness-based crack propagation criterion, numerical simulations were conducted to analyze the crack propagation processes of the concrete-rock interfaces under different strain rates. The results indicated that the tensile strength and initial fracture toughness exhibited an obvious increasing tendency with the increase of the strain rates, and they showed a nearly linear relationship with the logarithms of the strain rates. Prediction models were proposed to calculate the tensile strength and initial fracture toughness of the concrete-rock interface under different strain rates. In addition, the initial fracture toughness-based crack propagation criterion was proved to be applicable to analyze the crack propagation processes of the concrete-rock interfaces under both quasi-static and seismic strain rates. It was found that the fully-formed fracture process zone lengths and the corresponding crack length decreased obviously with the increase of the strain rates, indicating that the boundary effect of the concrete became stronger under the higher strain rates, which approached to the fracture behaviors of the large-size specimens.