Development of a wireless multichannel miniature impedance measurement system and its application for bolt loosening detection

Abstract

The piezoelectric impedance-based technique is always regarded as one of the most promising structural health monitoring and nondestructive evaluation methods. In recent years, impedance measurement chip AD5933 with the characteristics of high integration and cost-effectiveness makes it possible to address the huge and high-cost problems of the commercialized impedance measurement instrument during the process of structural health monitoring and defect identification. However, it still faces lots of challenges for the chips to be utilized in practical applications due to several limitations, such as short distance for data transmission, single measurement channel and artificial attendant requirement. In this paper, a wireless multichannel miniature impedance measurement system composed by the front-end measurement device and the remote measurement and control platform on the server, is firstly developed and presented with the functions of wireless data transmission, multi-channel acquisition and remote data post-processing. Subsequently, the design concept and composition of the system were introduced in detail. Then, a series of piezoelectric transducers related tests were conducted to validate its impedance measurement performance, especially when comparing with the ones measured by commercialized instruments. In addition, to verify its effectiveness and feasibility of the developed system for the structural damage detection, a bolt loosening detection experiment on the flange connection of a pipeline specimen was investigated for its damage localization and severity quantification. Finally, all the results demonstrated that the developed system provides a great possibility to be used as a convenient and portable impedance measurement tool for the civil structural health monitoring and damage identification in practical applications.