The effect of wood particles polyesterification with sorbitol and citric acid on the properties of particleboard produced with the use of PF/pMDI adhesive

IF 2.4 3区 农林科学 Q1 FORESTRY
Jakub Kawalerczyk, Marcin Kuliński, Andrea Majlingová, Dorota Dukarska, Radosław Mirski
{"title":"The effect of wood particles polyesterification with sorbitol and citric acid on the properties of particleboard produced with the use of PF/pMDI adhesive","authors":"Jakub Kawalerczyk,&nbsp;Marcin Kuliński,&nbsp;Andrea Majlingová,&nbsp;Dorota Dukarska,&nbsp;Radosław Mirski","doi":"10.1007/s00107-024-02124-9","DOIUrl":null,"url":null,"abstract":"<div><p>This study investigated the effect of pine particle polyesterification with the mixture of sorbitol and citric acid (SCA) on the properties of particleboard bonded with the PF/pMDI hybrid resin. The use of SCA with a concentration of 35% contributed to improvement in the internal bond of the particleboards, their water resistance and dimensional stability. However, lowering the concentration to 25% resulted in a deterioration of the properties of produced materials. The effect of different loadings of pMDI in the PF/pMDI resin (0%, 5%, 15%, 25%) was also investigated and the outcomes showed a positive effect of the share of 15% and 25%. Furthermore, boards made of treated particles were characterized by slightly better flammable properties (lower mass loss, flashing point temperature and delayed ignition), and the visibility of the effect increased with the increase in the concentration of the impregnate. The results also indicate that the introduction of pMDI may also influence the ignition of the board.</p></div>","PeriodicalId":550,"journal":{"name":"European Journal of Wood and Wood Products","volume":null,"pages":null},"PeriodicalIF":2.4000,"publicationDate":"2024-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s00107-024-02124-9.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"European Journal of Wood and Wood Products","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s00107-024-02124-9","RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"FORESTRY","Score":null,"Total":0}
引用次数: 0

Abstract

This study investigated the effect of pine particle polyesterification with the mixture of sorbitol and citric acid (SCA) on the properties of particleboard bonded with the PF/pMDI hybrid resin. The use of SCA with a concentration of 35% contributed to improvement in the internal bond of the particleboards, their water resistance and dimensional stability. However, lowering the concentration to 25% resulted in a deterioration of the properties of produced materials. The effect of different loadings of pMDI in the PF/pMDI resin (0%, 5%, 15%, 25%) was also investigated and the outcomes showed a positive effect of the share of 15% and 25%. Furthermore, boards made of treated particles were characterized by slightly better flammable properties (lower mass loss, flashing point temperature and delayed ignition), and the visibility of the effect increased with the increase in the concentration of the impregnate. The results also indicate that the introduction of pMDI may also influence the ignition of the board.

Abstract Image

用山梨醇和柠檬酸聚酯木粒对使用 PF/pMDI 粘合剂生产的刨花板性能的影响
本研究调查了松木颗粒聚酯化与山梨醇和柠檬酸混合物(SCA)对用 PF/pMDI 混合树脂粘合的刨花板性能的影响。使用浓度为 35% 的 SCA 有助于改善刨花板的内部粘结性、耐水性和尺寸稳定性。然而,将浓度降至 25% 会导致所生产材料的性能下降。还研究了 PF/pMDI 树脂中不同 pMDI 含量(0%、5%、15%、25%)的影响,结果表明 15% 和 25% 的含量具有积极影响。此外,用经过处理的颗粒制成的木板的可燃性能略有改善(质量损失、闪点温度和延迟着火均较低),而且随着浸渍剂浓度的增加,效果也越来越明显。结果还表明,引入 pMDI 也会影响木板的点燃。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
European Journal of Wood and Wood Products
European Journal of Wood and Wood Products 工程技术-材料科学:纸与木材
CiteScore
5.40
自引率
3.80%
发文量
124
审稿时长
6.0 months
期刊介绍: European Journal of Wood and Wood Products reports on original research and new developments in the field of wood and wood products and their biological, chemical, physical as well as mechanical and technological properties, processes and uses. Subjects range from roundwood to wood based products, composite materials and structural applications, with related jointing techniques. Moreover, it deals with wood as a chemical raw material, source of energy as well as with inter-disciplinary aspects of environmental assessment and international markets. European Journal of Wood and Wood Products aims at promoting international scientific communication and transfer of new technologies from research into practice.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信