Autostereoscopic 3D viewing can change the dimensions of the crystalline lens in myopes.

Abstract

Purpose: Autostereoscopic displays have become increasingly common, but their impact on ocular dimensions remains unknown. We sought to identify changes in the crystalline lens dimensions induced by autostereoscopic three-dimensional (3D) viewing.

Methods: Forty young adults (age: 22.6 ± 2.0 years, male/female: 15/25) were consecutively enrolled and randomly divided into two groups (3D and two-dimensional [2D] viewing groups) to watch a 30-min movie clip displayed in 3D or 2D mode on a tablet computer. The lens thickness (LT), diameter, curvature, decentration and tilt were measured with anterior segment optical coherence tomography under both non-accommodating (static) and accommodating conditions.

Results: In the static condition, the LT decreased by 0.03 ± 0.03 mm (p < 0.001) and the anterior radius of curvature (ARC) increased by 0.49 ± 0.59 mm (p = 0.001) post-3D viewing. In contrast, following 2D viewing, the ARC decreased by 0.23 ± 0.25 mm (p = 0.001). Additionally, the increase in the steep ARC post-3D viewing was greater in high-myopic eyes than low to moderate myopic eyes (p = 0.04). When comparing the accommodative with the static (non-accommodative) condition, for 3D viewing the lens decentration decreased (-0.03 ± 0.05 mm, p = 0.02); while for 2D viewing, the posterior curvature radius (-0.14 ± 0.20 mm, p = 0.006) and diameter (-0.13 ± 0.20 mm, p = 0.01) decreased.

Conclusions: Viewing with the autostereoscopic 3D tablet could temporally decrease the thickness and curvature of the lens under non-accommodating conditions. However, its long-term effect requires further exploration.