Wan-Jun Ye, Xiao Fu, Yun-Tao Wu, Zi-Hao Zhou, Qian-Qian Ma
{"title":"Experimental study on the mechanical properties of desert sand improved by the combination of additives and bio-cement.","authors":"Wan-Jun Ye, Xiao Fu, Yun-Tao Wu, Zi-Hao Zhou, Qian-Qian Ma","doi":"10.1007/s00449-024-03034-z","DOIUrl":null,"url":null,"abstract":"<p><p>Bio-cement is a green and energy-saving building material that has attracted much attention in the field of ecological environment and geotechnical engineering in recent years. The aim of this study is to investigate the use of bio-cement (enzyme-induced calcium carbonate precipitation-EICP) in combination with admixtures for the improvement of desert sands, which can effectively improve the mechanical properties of desert sands and is particularly suitable for sand-rich countries. In addition, the suitability of tap water in bio-cement was elucidated and the optimum ratio of each influencing factor when tap water is used as a solvent was derived. The results showed that peak values of unconfined compressive strength (maximum increase of about 130 times), shear strength (increase of 27.09%), calcium carbonate precipitation value (increase of about 4.39 times), and permeability (decrease of about 93.72 times) were obtained in the specimens modified by EICP combined with admixture as compared to the specimens modified by EICP only. The incorporation of skimmed milk powder, though significantly increasing the strength, is not conducive to cost control. The microscopic tests show that the incorporation of admixtures can provide nucleation sites for EICP, thus improving the properties of desert sand. This work can provide new research ideas for cross-fertilization between the disciplines of bio-engineering, ecology, and civil engineering.</p>","PeriodicalId":9024,"journal":{"name":"Bioprocess and Biosystems Engineering","volume":" ","pages":"1453-1469"},"PeriodicalIF":3.5000,"publicationDate":"2024-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bioprocess and Biosystems Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s00449-024-03034-z","RegionNum":3,"RegionCategory":"生物学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2024/7/8 0:00:00","PubModel":"Epub","JCR":"Q2","JCRName":"BIOTECHNOLOGY & APPLIED MICROBIOLOGY","Score":null,"Total":0}
引用次数: 0
Abstract
Bio-cement is a green and energy-saving building material that has attracted much attention in the field of ecological environment and geotechnical engineering in recent years. The aim of this study is to investigate the use of bio-cement (enzyme-induced calcium carbonate precipitation-EICP) in combination with admixtures for the improvement of desert sands, which can effectively improve the mechanical properties of desert sands and is particularly suitable for sand-rich countries. In addition, the suitability of tap water in bio-cement was elucidated and the optimum ratio of each influencing factor when tap water is used as a solvent was derived. The results showed that peak values of unconfined compressive strength (maximum increase of about 130 times), shear strength (increase of 27.09%), calcium carbonate precipitation value (increase of about 4.39 times), and permeability (decrease of about 93.72 times) were obtained in the specimens modified by EICP combined with admixture as compared to the specimens modified by EICP only. The incorporation of skimmed milk powder, though significantly increasing the strength, is not conducive to cost control. The microscopic tests show that the incorporation of admixtures can provide nucleation sites for EICP, thus improving the properties of desert sand. This work can provide new research ideas for cross-fertilization between the disciplines of bio-engineering, ecology, and civil engineering.
期刊介绍:
Bioprocess and Biosystems Engineering provides an international peer-reviewed forum to facilitate the discussion between engineering and biological science to find efficient solutions in the development and improvement of bioprocesses. The aim of the journal is to focus more attention on the multidisciplinary approaches for integrative bioprocess design. Of special interest are the rational manipulation of biosystems through metabolic engineering techniques to provide new biocatalysts as well as the model based design of bioprocesses (up-stream processing, bioreactor operation and downstream processing) that will lead to new and sustainable production processes.
Contributions are targeted at new approaches for rational and evolutive design of cellular systems by taking into account the environment and constraints of technical production processes, integration of recombinant technology and process design, as well as new hybrid intersections such as bioinformatics and process systems engineering. Manuscripts concerning the design, simulation, experimental validation, control, and economic as well as ecological evaluation of novel processes using biosystems or parts thereof (e.g., enzymes, microorganisms, mammalian cells, plant cells, or tissue), their related products, or technical devices are also encouraged.
The Editors will consider papers for publication based on novelty, their impact on biotechnological production and their contribution to the advancement of bioprocess and biosystems engineering science. Submission of papers dealing with routine aspects of bioprocess engineering (e.g., routine application of established methodologies, and description of established equipment) are discouraged.