Investigating the Effect of ABS on the Mechanical Properties, Morphology, Printability, and 4D Printing of PETG-ABS Blends

IF 5.4 3区材料科学 Q2 CHEMISTRY, PHYSICAL

ACS Applied Energy Materials Pub Date : 2024-06-14 DOI:10.1002/mame.202470011

Kiandokht Mirasadi, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Mostafa Baghani

引用次数: 0

Abstract

Front Cover: The cover image of article 2400038 by Mostafa Baghani and co-workers shows the free shape recovery process of 3D printed PETG-ABS blend in terms of time at a recovery temperature of about 100 °C. This blend is prepared by melt mixing in the internal mixer at a temperature of 200 °C and 60 rpm for 6 minutes, and the final part is 3D printed by granule-based material extrusion method.

Abstract Image

查看原文本刊更多论文

研究 ABS 对 PETG-ABS 混合物的机械性能、形态、可印刷性和 4D 印刷的影响

封面：Mostafa Baghani 及其合作者撰写的文章 2400038 的封面图片显示了三维打印 PETG-ABS 混合物在约 100 °C 的恢复温度下以时间为单位的自由形状恢复过程。这种混合物是通过在内部混合器中以 200 °C 的温度和 60 rpm 的转速进行 6 分钟的熔融混合制备的，最终部件是通过基于颗粒材料的挤出方法进行 3D 打印的。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

ACS Applied Energy Materials Materials Science-Materials Chemistry

CiteScore

10.30

自引率

6.20%

发文量

1368

期刊介绍： ACS Applied Energy Materials is an interdisciplinary journal publishing original research covering all aspects of materials, engineering, chemistry, physics and biology relevant to energy conversion and storage. The journal is devoted to reports of new and original experimental and theoretical research of an applied nature that integrate knowledge in the areas of materials, engineering, physics, bioscience, and chemistry into important energy applications.