{"title":"Effects of the processing parameters and laser textures in friction stir spot welding of Al alloy and polyimide joints","authors":"Jicheng Gao, Xin Mei, Jiachen Dong, Junke Jiao","doi":"10.1177/09544054241252859","DOIUrl":null,"url":null,"abstract":"In this paper, friction stir spot welding (FSSW) technology was introduced to join 7075 Al alloy to polyimide (PI) sheets. The effects of the FSSW parameters and laser textures on the microstructure and tensile shear load of the Al/PI joint were studied. The optimum FSSW parameters were the rotation speed of 2400 r/min, the plunge depth of 0.4 mm, the dwell time of 20 s, and the plunge speed of 10 mm/min. The tensile shear load of the joint increased owing to the laser textures in the Al alloy surface. Cross-sections showed that the mechanical locking was found between the Al alloy and PI. The XPS results revealed that no chemical bond were formed at the welding interface after laser textures. The joining mechanism of Al 7075 and PI was main the mechanical locking.","PeriodicalId":20663,"journal":{"name":"Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2024-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1177/09544054241252859","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
引用次数: 0
Abstract
In this paper, friction stir spot welding (FSSW) technology was introduced to join 7075 Al alloy to polyimide (PI) sheets. The effects of the FSSW parameters and laser textures on the microstructure and tensile shear load of the Al/PI joint were studied. The optimum FSSW parameters were the rotation speed of 2400 r/min, the plunge depth of 0.4 mm, the dwell time of 20 s, and the plunge speed of 10 mm/min. The tensile shear load of the joint increased owing to the laser textures in the Al alloy surface. Cross-sections showed that the mechanical locking was found between the Al alloy and PI. The XPS results revealed that no chemical bond were formed at the welding interface after laser textures. The joining mechanism of Al 7075 and PI was main the mechanical locking.
期刊介绍:
Manufacturing industries throughout the world are changing very rapidly. New concepts and methods are being developed and exploited to enable efficient and effective manufacturing. Existing manufacturing processes are being improved to meet the requirements of lean and agile manufacturing. The aim of the Journal of Engineering Manufacture is to provide a focus for these developments in engineering manufacture by publishing original papers and review papers covering technological and scientific research, developments and management implementation in manufacturing. This journal is also peer reviewed.
Contributions are welcomed in the broad areas of manufacturing processes, manufacturing technology and factory automation, digital manufacturing, design and manufacturing systems including management relevant to engineering manufacture. Of particular interest at the present time would be papers concerned with digital manufacturing, metrology enabled manufacturing, smart factory, additive manufacturing and composites as well as specialist manufacturing fields like nanotechnology, sustainable & clean manufacturing and bio-manufacturing.
Articles may be Research Papers, Reviews, Technical Notes, or Short Communications.