Technology of Manufacturing Large-Format Ceramic Refractory Products of Different Compositions and Structures by 3D Printing. Part 1. Principle of Form Construction1

IF 0.4 4区材料科学 Q4 MATERIALS SCIENCE, CERAMICS

Refractories and Industrial Ceramics Pub Date : 2024-05-06 DOI:10.1007/s11148-024-00854-0

B. L. Krasnyi, N. A. Makarov, K. I. Ikonnikov, D. D. Bernt, A. S. Sizova, A. L. Galganova, O. I. Rodimov

引用次数: 0

Abstract

The technology for 3D printing large-format ceramic refractories used in thermal units and refractory equipment has been developed. Because of the capillary effect at the grain boundaries in printed layers, the proposed technology enables achieving very high interlayer cohesion, obtaining ceramic refractory products not limited by geometric dimensions and shape, including the finished lining of any thermal units.

Abstract Image

查看原文本刊更多论文

利用 3D 打印技术制造不同成分和结构的大型陶瓷耐火制品。第 1 部分.形状构造原理1

用于热力设备和耐火设备的大型陶瓷耐火材料的三维打印技术已经开发出来。由于打印层晶粒边界的毛细管效应，该技术可实现极高的层间内聚力，从而获得不受几何尺寸和形状限制的陶瓷耐火制品，包括任何热工装置的成品内衬。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

$Refractories and Industrial Ceramics$

Refractories and Industrial Ceramics 工程技术-材料科学：硅酸盐

CiteScore

0.90

自引率

20.00%

发文量

审稿时长

6-12 weeks

期刊介绍： Refractories and Industrial Ceramics publishes peer-reviewed articles on the latest developments and discoveries in the field of refractory materials and ceramics, focusing on the practical aspects of their production and use. Topics covered include: Scientific Research; Raw Materials; Production; Equipment; Heat Engineering; Applications.