Effect of Ce content on the microstructure and TiN precipitation behaviour of high-titanium steel during slow cooling solidification

IF 1.3 4区材料科学 Q3 METALLURGY & METALLURGICAL ENGINEERING

International Journal of Cast Metals Research Pub Date : 2024-04-12 DOI:10.1080/13640461.2024.2339552

Yong Wan, Chuansheng Tang, Guangwei Yang, Xuejian Zhang, Yonghong Wen, Lijie Tian, Mingqi Liu

引用次数: 0

Abstract

This study used high-temperature melting experiments, optical microscopy, and scanning electron microscopy to investigate the effects of various Ce contents (0 wt.%~0.0165 wt.%) on the microstructu...

查看原文本刊更多论文

Ce 含量对高钛钢在缓冷凝固过程中的微观结构和 TiN 沉淀行为的影响

本研究采用高温熔融实验、光学显微镜和扫描电子显微镜，研究了不同的Ce含量（0 wt.%~0.0165 wt.%）对钛白粉微观结构的影响。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Cast Metals Research 工程技术-冶金工程

CiteScore

2.70

自引率

7.10%

发文量

审稿时长

7.5 months

期刊介绍： The International Journal of Cast Metals Research is devoted to the dissemination of peer reviewed information on the science and engineering of cast metals, solidification and casting processes. Assured production of high integrity castings requires an integrated approach that optimises casting, mould and gating design; mould materials and binders; alloy composition and microstructure; metal melting, modification and handling; dimensional control; and finishing and post-treatment of the casting. The Journal reports advances in both the fundamental science and materials and production engineering contributing to the successful manufacture of fit for purpose castings.