A low-cost approach to determine the optimum conductor plate thickness of linear permanent magnet eddy current brakes

IF 1.1 4区工程技术 Q4 ENGINEERING, ELECTRICAL & ELECTRONIC

International Journal of Applied Electromagnetics and Mechanics Pub Date : 2024-03-12 DOI:10.3233/jae-220292

Panpan Yang, Jianwei Li, Leian Zhang, Zonggao Mu, Zixuan Li, Jianhong Wang

引用次数: 0

Abstract

This paper proposes a low-cost approach to determine the optimum Conductor Plate (CP) thickness without needs for mathematical models and large data volumes, which means that 0.6 times of the Standard Depth of Penetration (SDoP) can be directly selected as the optimum CP thickness without calculation. Firstly, the SDoP is introduced. Then, the influences of speed and conductivity on the optimum CP thickness are investigated. Finally, the relationship between the SDoP and the optimum CP thickness is found. The optimum CP thickness can be selected directly according to the relationship without mathematical models and large data volumes. It not only guarantees high braking force, but also reduces the weight of the LPMECBs as much as possible.

查看原文本刊更多论文

确定线性永磁涡流制动器最佳导体板厚度的低成本方法

本文提出了一种无需数学模型和大量数据即可确定最佳导体板（CP）厚度的低成本方法，即无需计算即可直接选择标准贯入深度（SDoP）的 0.6 倍作为最佳 CP 厚度。首先介绍 SDoP。然后，研究了速度和电导率对 CP 最佳厚度的影响。最后，找到了 SDoP 与 CP 最佳厚度之间的关系。无需数学模型和大量数据，就可根据关系直接选择最佳 CP 厚度。它不仅能保证较高的制动力，还能尽可能减轻 LPMECB 的重量。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Applied Electromagnetics and Mechanics 物理-工程：电子与电气

CiteScore

1.70

自引率

0.00%

发文量

100

审稿时长

4.6 months

期刊介绍： The aim of the International Journal of Applied Electromagnetics and Mechanics is to contribute to intersciences coupling applied electromagnetics, mechanics and materials. The journal also intends to stimulate the further development of current technology in industry. The main subjects covered by the journal are: Physics and mechanics of electromagnetic materials and devices Computational electromagnetics in materials and devices Applications of electromagnetic fields and materials The three interrelated key subjects – electromagnetics, mechanics and materials - include the following aspects: electromagnetic NDE, electromagnetic machines and devices, electromagnetic materials and structures, electromagnetic fluids, magnetoelastic effects and magnetosolid mechanics, magnetic levitations, electromagnetic propulsion, bioelectromagnetics, and inverse problems in electromagnetics. The editorial policy is to combine information and experience from both the latest high technology fields and as well as the well-established technologies within applied electromagnetics.