Turbulence spreading effects on the ELM size and SOL width

Abstract

BOUT++ turbulence simulations were performed to investigate the impact of turbulence spreading on the edge localized mode (ELM) size and divertor heat flux width $({\lambda _q})$ broadening in small ELM regimes. This study is motivated by EAST experiments. BOUT++ linear simulations of a pedestal radial electric field (Er) scan show that the dominant toroidal number mode (n) shifts from high-n to low-n, with a narrow mode spectrum, and the maximum linear growth rate increases as the pedestal Er well deepens. The nonlinear simulations show that as the net E × B pedestal flow increases, the pressure fluctuation level and its inward penetration beyond the top of the pedestal both increase. This leads to a transition from small ELMs to large ELMs. Both inward and outward turbulence spreading are sensitive to the scrape-off-layer (SOL) plasma profiles. The inward turbulence spreading increases for the steep SOL profiles, leading to increasing pedestal energy loss in the small ELM regime. The SOL width $({\lambda _q})$ is significantly broadened progressing from the ELM-free to small ELM regime, due to the onset of strong radial turbulent transport. The extent of the SOL width $({\lambda _q})$ broadening depends strongly on outward turbulence spreading. The fluctuation energy intensity flux ${\varGamma _\varepsilon }$ at the separatrix can be enhanced by increasing either pedestal Er flow shear or local SOL pressure gradient. The ${\lambda _q}$ is broadened as the fluctuation energy intensity flux ${\varGamma _\varepsilon }$ at the last close flux surface (LCFS) increases. Local SOL E × B flow shear will restrain outward turbulence spreading and the associated heat flux width broadening. Operating in H-mode with small ELMs has the potential to solve two critical problems: reducing the ELM size and broadening the SOL width.