Effect of Tempering Temperature on Mechanical and Corrosion Properties of Modified Martensitic Stainless Steel CA6NM

IF 0.6 4区材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING

Metal Science and Heat Treatment Pub Date : 2024-02-19 DOI:10.1007/s11041-024-00985-8

Mukhlis Agung Prasetyo, Nofrijon Sofyan, Faried M. Ridlo, Efendi Mabruri

引用次数: 0

Abstract

The effect of tempering temperature on the mechanical and corrosion properties of modified martensitic steel CA6NM is studied. Mechanical characteristics are determined in tensile and hardness tests, and corrosion properties are investigated using potentiodynamic and cyclic polarization in an artificial brine solution. The relationship between the microstructure and the mechanical and corrosion properties of the steel in the heat-treated state is revealed. It is shown that the best combination of mechanical and corrosion properties is achieved by tempering at a temperature of 600°C.

Abstract Image

查看原文本刊更多论文

回火温度对改性马氏体不锈钢 CA6NM 机械性能和腐蚀性能的影响

研究了回火温度对改性马氏体钢 CA6NM 的机械性能和腐蚀性能的影响。拉伸和硬度测试测定了机械特性，人工盐水溶液中的电位极化和循环极化研究了腐蚀特性。研究揭示了钢在热处理状态下的微观结构与机械和腐蚀特性之间的关系。结果表明，在 600°C 的温度下进行回火可实现机械性能和腐蚀性能的最佳组合。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Metal Science and Heat Treatment 工程技术-冶金工程

CiteScore

1.20

自引率

16.70%

发文量

102

审稿时长

4-8 weeks

期刊介绍： Metal Science and Heat Treatment presents new fundamental and practical research in physical metallurgy, heat treatment equipment, and surface engineering. Topics covered include: New structural, high temperature, tool and precision steels; Cold-resistant, corrosion-resistant and radiation-resistant steels; Steels with rapid decline of induced properties; Alloys with shape memory effect; Bulk-amorphyzable metal alloys; Microcrystalline alloys; Nano materials and foam materials for medical use.