Measurement of the Dynamic Viscosity of Filled Composites on the Basis of Thermosetting Cast Polyurethane

IF 0.7 4区工程技术 Q4 ENGINEERING, CHEMICAL

Theoretical Foundations of Chemical Engineering Pub Date : 2024-01-17 DOI:10.1134/S0040579523050068

A. S. Dorokhov, Yu. A. Goncharova, A. S. Sviridov, S. P. Tuzhilin, R. A. Alekhina

引用次数: 0

Abstract—Studies on the dynamic viscosity of composites based on a two-component polyurethane compound with fillers in the form of shungite, talc, and basalt fibers (3 vol %) with addition of dichloromethane as an organic solvent (10 vol %) are presented. Based on the results of the studies, it is revealed that the most rational composites for casting into elastic molds are the composites containing shungite and talc as fillers.

Abstract Image

查看原文本刊更多论文

以热固性浇注聚氨酯为基础测量填充复合材料的动态粘度

摘要--本研究介绍了以双组分聚氨酯化合物为基础的复合材料的动态粘度，该复合材料的填料形式为霰石、滑石和玄武岩纤维（3 Vol %），并添加了二氯甲烷作为有机溶剂（10 Vol %）。研究结果表明，最适合浇注到弹性模具中的复合材料是含有霰石和滑石作为填料的复合材料。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Theoretical Foundations of Chemical Engineering 工程技术-工程：化工

CiteScore

1.20

自引率

25.00%

发文量

审稿时长

24 months

期刊介绍： Theoretical Foundations of Chemical Engineering is a comprehensive journal covering all aspects of theoretical and applied research in chemical engineering, including transport phenomena; surface phenomena; processes of mixture separation; theory and methods of chemical reactor design; combined processes and multifunctional reactors; hydromechanic, thermal, diffusion, and chemical processes and apparatus, membrane processes and reactors; biotechnology; dispersed systems; nanotechnologies; process intensification; information modeling and analysis; energy- and resource-saving processes; environmentally clean processes and technologies.