Uji Mekanik Beton Polimer Berbahan Batu Apung dan Serbuk Cangkang Kelapa Sawit
引用次数: 0
Abstract
A research on polymer concrete mechanics tests has been carried out to find out the best mix in polymer concrete using pumice and palm oil shell powder as independent variables with composition variations of 20%:0%, 16%:4%, and 14%:6%. Then the fixed variable is the composition of 60% sand and 20% epoxy as an adhesive. The sample was formed in a mold made of steel in the form of a beam (10 x 2 x 1 cm) and then pressed using a hot press at 90°C for 20 minutes. The results showed that the optimum composition variations were pumice stone and palm kernel shell powder with a ratio of 20%:0%, 60% sand, and 20% epoxy as adhesive with a compressive strength of 14.44 MPa, a tensile strength of 0.85 MPa, and flexural strength of 7.35 MPa.基于浮石的聚合物混凝土和棕榈壳粉的力学测试
对聚合物混凝土力学试验进行了研究，以找出聚合物混凝土的最佳混合物，该混合物以浮石和棕榈油壳粉为自变量，成分变化为 20%:0%、16%:4% 和 14%:6%。固定变量为 60% 的沙子和 20% 的环氧树脂作为粘合剂。样品在钢制成的梁状（10 x 2 x 1 厘米）模具中成型，然后用热压机在 90°C 下压制 20 分钟。结果表明，最佳成分变化为浮石和棕榈仁壳粉的比例为 20%:0%，砂的比例为 60%，环氧树脂作为粘合剂的比例为 20%，抗压强度为 14.44 兆帕，抗拉强度为 0.85 兆帕，抗折强度为 7.35 兆帕。
本文章由计算机程序翻译，如有差异，请以英文原文为准。
求助全文
约1分钟内获得全文
求助全文
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
