Experimental and numerical studies on the effectiveness of high-strength steels protecting against API BZ projectiles

Abstract

ABSTRACTThis paper uses numerical and experimental methods to look at how well Xar450 and Perform 700 high-strength steels protect against a 7.62 × 39 mm API BZ projectile. The numerical study of the target thicknesses varies from 3 mm to 4 mm and 6 mm. And they are struck at 0°, 15°, 30°, 45°, and 60° oblique angles. Numerical simulation results show that at a normal impact angle, the bullet can break through the Perform700 targets in all thicknesses; however, the resistance performance of the target plate increases with the rise of oblique angles. The Xar450 target plates of 4 mm and 6 mm can resist the bullet at any oblique angle, but the bullet can easily penetrate 3 mm thickness from 0° to 30° oblique angles. The experiment is based on the VPAM-APR 2006 standard. The experiment results showed that the bullet perforated through the Perform700 target plate with a thickness of 3 mm at 0° and 30° oblique angles. In contrast, the bullet cannot penetrate the Xar450 target thickness of 4 mm at a normal angle. The findings of this research are used in the formulation of the design methodology for a light armoured vehicle. Besides, they have considerable importance in the realm of calculating and developing anti-fracture structures for practical applications.KEYWORDS: 7.62x39 mm API BZ projectilenumerical simulationXar450Perform700oblique angle AcknowledgementThis research is funded by Le Quy Don Technical University Research Fund under the grand number 23.1.10.Disclosure statementNo potential conflict of interest was reported by the author(s).Data availability statementThe data that support the findings of this study are available from the corresponding authors upon reasonable requestAdditional informationFundingThis work was supported by the This research is funded by Le Quy Don Technical University Research Fund [23.1.10].