Photopolymer Ring-Resonator Based Temperature Sensor Directly 3D Printed on a Dual-Core Optical Fiber Tip

Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES) Pub Date : 1900-01-01 DOI:10.1364/sensors.2022.sw1e.4

P. Gill, D. Marom

引用次数: 0

Abstract

We 3D-print a nanofin-supported waveguide bridging two cores at the fiber tip and further coupled to a printed ring resonator. The resonance wavelength shift is probed from the fiber’s distal end, shifting by 47 pm/°K.

查看原文本刊更多论文

基于光聚合物环形谐振器的温度传感器直接3D打印在双芯光纤尖端上

我们3d打印了一个纳米鳍支撑的波导，在光纤尖端桥接两个核心，并进一步耦合到一个打印的环形谐振器。从光纤的远端探测共振波长的偏移，偏移量为47 pm/°K。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES)

自引率

0.00%

发文量