New designs if end-fire Tapered Slot Antenna: analysis & synthesis

2009 International Conference on Advances in Computational Tools for Engineering Applications Pub Date : 2009-07-15 DOI:10.1109/ACTEA.2009.5227945

E. Rachid, S. Abou-Jaoude, S. Medlej

引用次数: 1

Abstract

This paper is concerned with investigations of three types of broadband antenna elements that are to be used for spatial power combining and phased-array radar application. The first antenna is the Linearly Tapered Slot Antenna (LTSA) with L=λ0 while the second and the third are the Exponentially Tapered Slot Antenna (ETSA) with two different values of L (L=5 mm and L=0 mm). These antennas are to be fabricated with a low dielectric constant substrate material (RT/Duriod 5880 with dielectric constant εr =2.2), substrate thickness of 1.27 mm and design frequency of 30 GHz. Simulations have been carried out by a program called IE3D, using the Method of Moments.

查看原文本刊更多论文

端火锥形缝隙天线的新设计:分析与综合

本文研究了用于空间功率组合和相控阵雷达应用的三种宽带天线单元。第一个天线是线性锥形槽天线(LTSA)，其L=λ0;第二个和第三个是指数锥形槽天线(ETSA)，其L值不同(L=5 mm和L=0 mm)。该天线采用低介电常数衬底材料(RT/ period 5880，介电常数εr =2.2)，衬底厚度为1.27 mm，设计频率为30 GHz。模拟是由一个名为IE3D的程序使用矩量法进行的。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2009 International Conference on Advances in Computational Tools for Engineering Applications

自引率

0.00%

发文量