Time and frequency domain characterisation of a 3D-Printed bi-conical antenna dispersion

2016 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC) Pub Date : 2016-09-01 DOI:10.1109/APWC.2016.7738161

J. Andriambeloson, P. G. Wiid

引用次数: 0

Abstract

The characterisation of the dispersion response of an extruded 3D-printed bi-conical antenna is presented using group delay and system fidelity factor (SFF). Measurements were performed in time and frequency domain using two identical antennas. A stable group delay is found and moderate correlation is observed between received and transmitted pulses.

查看原文本刊更多论文

3d打印双圆锥天线色散的时域和频域特性

利用群延迟和系统保真系数(SFF)对挤压型3d打印双圆锥天线的色散响应进行了表征。使用两个相同的天线在时域和频域进行测量。发现了稳定的群延迟，并且在接收和发射脉冲之间观察到适度的相关性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2016 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)

自引率

0.00%

发文量