Transformation Texture Analysis of BCC and BCT Ferrous Martensite

Texture, Stress, and Microstructure Pub Date : 1900-01-01 DOI:10.1155/TSM.22.43

H. Miyaji, E. Furubayashi

引用次数: 4

Abstract

The theoretical prediction of transformation textures, that developed in thin sheet without external stress, was carried out based on the Bain-Strain and Twinning-Shear model, respectively. To examine the validity of the prediction, the experiments were conducted with X-ray pole figure method on Fe-30Ni and Fe-30Ni-0.8C alloy sheets. The results obtained are as follows:

查看原文本刊更多论文

BCC和BCT亚铁马氏体相变织构分析

分别基于贝恩-应变模型和孪生-剪切模型对无外力作用下薄板上形成的相变织构进行了理论预测。为了验证预测的有效性，采用x射线极图法对Fe-30Ni和Fe-30Ni-0.8 c合金板材进行了实验。所得结果如下:

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Texture, Stress, and Microstructure

自引率

0.00%

发文量