Study on two types of commercial ESD simulators

Asia-Pacific Conference on Environmental Electromagnetics, 2003. CEEM 2003. Proceedings. Pub Date : 1900-01-01 DOI:10.1109/CEEM.2003.237921

Ruan Xiaofen, Zhang Xijun, Wu Zhancheng, W. Shuping

引用次数: 2

Abstract

In this paper, the performances of two types of ESD simulators (ESS-200AX made in Noiseken and NSG435 made in Schaffner) are studied, and ESD immunity experiments of a single chip microcomputer (SCM) system are made. The experimental results show that the differences between two simulators yield inconsistent test results though they both comply with the IEC61000-4-2 ESD standard. Therefore, besides the ESD current waveform, the relevant IEC61000-4-2 ESD standard should specify the discharge current derivative, related electromagnetic field in detail, and give unified specifications for the construction and configuration of ESD simulators.

查看原文本刊更多论文

两种商用ESD模拟器的研究

本文对Noiseken公司生产的ESS-200AX和Schaffner公司生产的NSG435两种ESD模拟器的性能进行了研究，并在单片机系统上进行了ESD抗扰实验。实验结果表明，虽然两个模拟器都符合IEC61000-4-2 ESD标准，但两者的差异导致测试结果不一致。因此，除ESD电流波形外，相关IEC61000-4-2 ESD标准还应详细规定放电电流导数、相关电磁场，并对ESD模拟器的构建和配置给出统一的规范。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Asia-Pacific Conference on Environmental Electromagnetics, 2003. CEEM 2003. Proceedings.

自引率

0.00%

发文量