Realization of SRG position sensorless technique with current chopping mode

ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501) Pub Date : 2001-08-18 DOI:10.1109/ICEMS.2001.971905

Liu Chuang, Yan Yangguang

引用次数: 3

Abstract

A novel current chopping strategy for a switched reluctance generator (SRG), a full conducted current chopping (FCCC) scheme, is presented in this paper. According to the characteristics of the phase current waveform of SRG generating operation, it can generate under sensorless conditions without additional circuitry or position signal algorithms. Simulation demonstrates the feasibility of this scheme in detail. Experimental results of a 6 kW 6/4 configuration SRG shows its simplicity and high reliability with little decrease in efficiency.

查看原文本刊更多论文

电流斩波模式下SRG无位置传感器技术的实现

本文提出了一种新的开关磁阻发电机(SRG)斩波策略——全导电流斩波(FCCC)方案。根据SRG产生工作的相电流波形特点，可以在无传感器条件下产生，无需附加电路或位置信号算法。仿真实验详细验证了该方案的可行性。实验结果表明，6 kW 6/4配置的SRG结构简单，可靠性高，效率降低小。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501)

自引率

0.00%

发文量