Bandwidth and impedance matching enhancement of printed quadrifilar antenna for GPS (L1), GLONASS (L1), Baidu (B1I)

2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT) Pub Date : 2018-05-01 DOI:10.1109/USBEREIT.2018.8384614

V. Chechetkin, A. Korotkov, A. Abbasov

引用次数: 1

Abstract

This paper is dedicated to the design and modeling of a quadrifilar antenna operating in the frequency range 1559–1610 MHz (GPS (L1), GLONASS (L1), Baidu (B1I)), formed by four quarter wavelength spiral radiators, each of which is a structure, consisting of a single signal and two parasitic grounded conductors. The investigation of the influence of shelter on antenna characteristics is provided.

查看原文本刊更多论文

本文致力于设计和建模工作在1559-1610 MHz频率范围(GPS (L1)， GLONASS (L1)， Baidu (B1I))的四线天线，该天线由四个四分之一波长的螺旋辐射体组成，每个螺旋辐射体是一个结构，由一个单信号和两个寄生接地导体组成。研究了遮挡对天线特性的影响。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT)

自引率

0.00%

发文量