Simulation on power characteristic of UHVDC during commutation failure and DC block

2017 IEEE Electrical Power and Energy Conference (EPEC) Pub Date : 2017-10-01 DOI:10.1109/EPEC.2017.8286182

Fanfan Li, Qian Chen, Xue Lin, P. Ju, Haoqing Xiong, Xin Shan, Bo Wang, C. Qin, Jian Zhao, Meng Jiang

引用次数: 3

Abstract

UHVDC commutation failure and DC block need to be studied in detail, for they will evidently affect the safety and stability of AC power grid. Firstly, the main circuit and control system are studied and analyzed in depth. Then, the simulation model is established in PSCAD software. After that, the curves of commutation failure and DC block in different cases are obtained. Finally, the correctness of this simulation platform is verified by comparison of some recording curves.

查看原文本刊更多论文

特高压直流换相故障和直流阻塞时的功率特性仿真

特高压直流换相故障和直流阻塞对交流电网的安全稳定有明显的影响，需要对其进行详细的研究。首先，对主电路和控制系统进行了深入的研究和分析。然后，在PSCAD软件中建立仿真模型。得到了不同情况下的换相失效曲线和直流阻塞曲线。最后，通过一些记录曲线的对比，验证了该仿真平台的正确性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2017 IEEE Electrical Power and Energy Conference (EPEC)

自引率

0.00%

发文量