Printed omnidirectional antenna for RFID applications

2013 IEEE International Conference on RFID-Technologies and Applications (RFID-TA) Pub Date : 2013-09-01 DOI:10.1109/RFID-TA.2013.6694525

M. Aziz, M. M. Shukor, M. K. Suaidi, B. Ahmad, F. M. Johar, H. Nornikman, F. A. Azmin, S. N. Salleh, M. F. Malek

引用次数: 2

Abstract

This paper proposed the dual band printed omnidirectional antenna for RFID applications at 2.45GHz. This antenna is made up from the double U-stubs and meander collinear structure. The antenna is based on the microstrip type of antenna. The return loss of the proposed antenna at 2.45GHz is -10.61dB and the bandwidth is 122MHz. The gain that has been achieved for this proposed antenna is 3.798dB.

查看原文本刊更多论文

用于RFID应用的印刷全向天线

本文提出了一种用于RFID应用的2.45GHz双频段印刷全向天线。该天线由双u型存根和弯曲共线结构组成。该天线是基于微带型天线。该天线在2.45GHz频段的回波损耗为-10.61dB，带宽为122MHz。该天线的增益为3.798dB。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2013 IEEE International Conference on RFID-Technologies and Applications (RFID-TA)

自引率

0.00%

发文量