The Use Of Used Oil From Treatment With Absorption and pyrolysis As A mixed of Diesel Oil To Performance Diesel Engine

Proceedings of the Proceedings of the 1st International Conference on Engineering, Science, and Commerce, ICESC 2019, 18-19 October 2019, Labuan Bajo, Nusa Tenggara Timur, Indonesia Pub Date : 2019-12-09 DOI:10.4108/eai.18-10-2019.2289916

A. Palinggi

{"title":"The Use Of Used Oil From Treatment With Absorption and pyrolysis As A mixed of Diesel Oil To Performance Diesel Engine","authors":"A. Palinggi","doi":"10.4108/eai.18-10-2019.2289916","DOIUrl":null,"url":null,"abstract":"An adsorption process is able to filter out solid objects in used oil such as dust, scrap metals and charcoal from burnings so that the color of used oil is not too dense even though it is still black. The pyrolysis process can improve the color of used oil so that it becomes clear yellow like new oil, even though it does not meet diesel engine fuel criteria. The mixture of used oil from the pyrolysis process with diesel fuel still meets the characteristics of diesel fuel because the results are close to the characteristics of diesel fuel. Research results show that the mixture of used oil in diesel engine fuel if used as fuel can save 10% of the fuel because the power and efficiency when compared with pure diesel fuel is almost the same, but the exhaust emissions are large if the percentage of used oil in fuel is increased","PeriodicalId":243340,"journal":{"name":"Proceedings of the Proceedings of the 1st International Conference on Engineering, Science, and Commerce, ICESC 2019, 18-19 October 2019, Labuan Bajo, Nusa Tenggara Timur, Indonesia","volume":"26 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the Proceedings of the 1st International Conference on Engineering, Science, and Commerce, ICESC 2019, 18-19 October 2019, Labuan Bajo, Nusa Tenggara Timur, Indonesia","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4108/eai.18-10-2019.2289916","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

Abstract

An adsorption process is able to filter out solid objects in used oil such as dust, scrap metals and charcoal from burnings so that the color of used oil is not too dense even though it is still black. The pyrolysis process can improve the color of used oil so that it becomes clear yellow like new oil, even though it does not meet diesel engine fuel criteria. The mixture of used oil from the pyrolysis process with diesel fuel still meets the characteristics of diesel fuel because the results are close to the characteristics of diesel fuel. Research results show that the mixture of used oil in diesel engine fuel if used as fuel can save 10% of the fuel because the power and efficiency when compared with pure diesel fuel is almost the same, but the exhaust emissions are large if the percentage of used oil in fuel is increased

查看原文本刊更多论文

吸收热解处理后的废油作为柴油混合油在柴油机中的应用

吸附过程可以过滤掉废油中燃烧产生的灰尘、废金属、木炭等固体物质，因此废油虽然仍然是黑色，但颜色不会太浓。热解过程可以改善废油的颜色，使其变得像新油一样清澈的黄色，即使它不符合柴油发动机燃料标准。热解过程中产生的废油与柴油混合后，由于结果接近柴油的特性，仍然满足柴油的特性。研究结果表明，柴油机燃料中用废油混合作为燃料，由于与纯柴油相比动力和效率几乎相同，可以节省10%的燃料，但如果燃料中使用废油的比例增加，废气排放量就大

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Proceedings of the Proceedings of the 1st International Conference on Engineering, Science, and Commerce, ICESC 2019, 18-19 October 2019, Labuan Bajo, Nusa Tenggara Timur, Indonesia

自引率

0.00%

发文量