Protective coatings-formation by microarc oxidation

Proceedings of the 8th International Scientific and Practical Conference of Students, Post-graduates and Young Scientists Modern Technique and Technologies, 2002. MTT 2002. Pub Date : 2002-04-08 DOI:10.1109/SPCMTT.2002.1213775

E.V. Khokhryakov, P. Butyagin, A. I. Mamaev

引用次数: 0

Abstract

Inclusion of the dispersed particles allows one to obtain coating with multiphase and multicomponent composition, inhomogeneous in composition. Taking into account. for these processes will allow one to simulate the coating composition. To obtain coating of a significant thickness it is necessary to control the processes of the pores and cracks formation. At the final stage it is necessary to create conditions for the defects electrochemical obliteration in coating.

查看原文本刊更多论文

保护涂层-微弧氧化形成

分散颗粒的包合可以得到多相和多组分组成，组成不均匀的涂层。考虑到。因为这些过程将允许人们模拟涂层组合物。为了获得相当厚的涂层，必须控制气孔和裂纹形成的过程。在最后阶段，需要为涂层中缺陷的电化学消除创造条件。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Proceedings of the 8th International Scientific and Practical Conference of Students, Post-graduates and Young Scientists Modern Technique and Technologies, 2002. MTT 2002.

自引率

0.00%

发文量