Fabrication of multi-channel polymeric PLC-type variable optical attenuator by UV embossing

OFC/NFOEC Technical Digest. Optical Fiber Communication Conference, 2005. Pub Date : 2005-03-06 DOI:10.1109/OFC.2005.192523

J. Kim, Choon‐Gi Choi, H. Sung

引用次数: 4

Abstract

Polymeric PLC-type thermo-optic variable optical attenuator was fabricated without residual slab waveguide by UV imprinting. Polymeric VOA showed 30 dB attenuation with 80 mW input power at 1.55 /spl mu/m. The rise and fall times are less than 5 msec.

查看原文本刊更多论文

多通道聚合物plc型可变光衰减器的UV压印制备

采用紫外印迹技术制备了无残余平板波导的聚合物plc型热光学可变光衰减器。聚合物VOA在1.55 /spl mu/m的输入功率为80 mW时衰减为30 dB。上升和下降的时间小于5毫秒。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

OFC/NFOEC Technical Digest. Optical Fiber Communication Conference, 2005.

自引率

0.00%

发文量