Flexural Strength and Ductility of High-Strength Concrete Columns

SP-176: High-Strength Concrete in Seismic Regions Pub Date : 1998-10-01 DOI:10.14359/5902

R. Park, H. Tanaka, Bo Li

{"title":"Flexural Strength and Ductility of High-Strength Concrete Columns","authors":"R. Park, H. Tanaka, Bo Li","doi":"10.14359/5902","DOIUrl":null,"url":null,"abstract":"High strength concrete with a specified compressive cylinder strength of up to 70 MPa for ductile elements in seismic design and of up to 100 MPa for other elements is now permitted by the recently revised New Zealand concrete design standard NZS 3101:1995. Also, longitudinal reinforcement with a characteristic yield strength of up to 500 MPa is allowed, and for transverse reinforcement in strength calculations a useable steel stress of up to 500 MPa for shear strength and 800 <Pa for confinement is permitted. For concrete with a concrete compressive cylinder strength greater than 55 MPa the parameters for the equivalent rectangular compressive stress block have been modified to rake into account the stress-strain characteristics of high strength concrete. Also, new design equations for confining reinforcement have been included to better account for the affect of the variation of axial load level. Simulated seismic load tests have been conducted in New Zealand to investigate the behavior of high strength concrete columns confined with normal and very high strength transverse reinforcement. These tests demonstrated that the yield strength of very high strength confining reinforcement may not be attained at the stage when the column reaches the peak flexural strength and that the thickness of concrete cover has an important influence on the behavior of columns.","PeriodicalId":208613,"journal":{"name":"SP-176: High-Strength Concrete in Seismic Regions","volume":"32 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1998-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"SP-176: High-Strength Concrete in Seismic Regions","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.14359/5902","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 7

Abstract

High strength concrete with a specified compressive cylinder strength of up to 70 MPa for ductile elements in seismic design and of up to 100 MPa for other elements is now permitted by the recently revised New Zealand concrete design standard NZS 3101:1995. Also, longitudinal reinforcement with a characteristic yield strength of up to 500 MPa is allowed, and for transverse reinforcement in strength calculations a useable steel stress of up to 500 MPa for shear strength and 800

查看原文本刊更多论文

高强混凝土柱的抗弯强度和延性

最近修订的新西兰混凝土设计标准NZS 3101:1995允许高强度混凝土，抗震设计中韧性构件的指定抗压强度为70mpa，其他构件的指定抗压强度为100mpa。此外，纵向钢筋的特性屈服强度可达500mpa，在强度计算中，横向钢筋的抗剪强度可达500mpa，约束强度可达800

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊