A low-power rail-to-rail 6-bit flash ADC based on a novel complementary average-value approach

Abstract

In this paper, a 6-bit 300-MSample/s(MS/s) flash analog-to-digital converter (ADC) with a novel complementary average-value (CAV) approach is proposed. Input signal is pre-processed and then steered to be compared with a fixed reference voltage level, which greatly simplifies the comparator design and thus power consumption is reduced. In addition, rail-to-rail input range can be achieved by the proposed CAV technique, and the offset as well as bubble errors can therefore be minimized as a result of similar operation condition arrangement of the comparators. Simulated with TSMC 1P5M 0.25 /spl mu/m process parameters, the results show that INL < /spl plusmn/0.4 LSB and DNL < /spl plusmn/0.1 LSB, and SNDR of 32.7dB can be achieved. The converter consumes 35mW at 2.5 V power supply and the power efficiency of this converter is only 3.3pJ/conv-step which compares favorably with other published results.