1.3 GHz, 10 MWp long pulse multibeam klystrons: A long heritage and proven reliability

2011 IEEE International Vacuum Electronics Conference (IVEC) Pub Date : 2011-02-21 DOI:10.1109/IVEC.2011.5747002

R. Marchesin, A. Beunas, F. Legrand, P. Thouvenin, M. Caplot, E. Boghossian

引用次数: 5

Abstract

Thales Electron Devices has been developing and manufacturing 10MW L-band vertical Multi Beam Klystrons (TH1801) for TTF, FLASH and PITZ machines at DESY for more than 10 years. At this point, 8 tubes have been installed at DESY with more than 80 000 hours of cumulated RF operation. All over these years, THALES has been collecting data on MBK tubes behavior which permitted to improve continuously the design margins and reliability. In order to allow horizontal installation in the XFEL tunnel, a horizontal version (TH1802) was fabricated, tested and qualified. The key performance of this tube is its high stability under all various operating conditions.

查看原文本刊更多论文

1.3 GHz, 10 MWp长脉冲多波束速调管:悠久的传统和可靠的可靠性

泰雷兹电子器件公司已经在DESY为TTF, FLASH和PITZ机器开发和制造10MW l波段垂直多束速调管(TH1801)超过10年。到目前为止，DESY已经安装了8根管，累计RF操作时间超过80000小时。这些年来，泰雷兹一直在收集有关MBK管性能的数据，从而不断提高设计余量和可靠性。为了允许在XFEL隧道中水平安装，制造了一个水平版本(TH1802)，进行了测试和合格。该管的关键性能是在各种操作条件下的高稳定性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2011 IEEE International Vacuum Electronics Conference (IVEC)

自引率

0.00%

发文量