{"title":"Crosstalk Analysis of Simultaneously Switching Coupled Interconnects Driven by Unipolar Inputs through Heterogeneous Resistive Drivers","authors":"B. Kaushik, S. Sarkar, R. P. Agarwal, R. C. Joshi","doi":"10.1109/ICET.2007.4516358","DOIUrl":null,"url":null,"abstract":"This paper focuses on waveform analysis and crosstalk peak estimation at far-end of victim line for simultaneously switching inputs with resistive drivers. A transmission line based low loss coupled ALC-model of interconnect is used for analytical purpose. Positive and negative peaks are estimated for the conditions when inputs to two coupled interconnects are switching in-phase and out-of-phase. Waveforms are analyzed in general with homogeneous and non-homogeneous drivers for unipolar inputs. The driver is modeled as linear resistance. Comparison of analytical results with SPICE extracted results shows that the error involved is less than 2% and 5% for in-phase and out-of- phase switching respectively. The comparisons of analytically obtained results with SPICE simulations show that the proposed model captures noise peaks and waveform shape quite well.","PeriodicalId":346773,"journal":{"name":"2007 International Conference on Emerging Technologies","volume":"169 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2007-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2007 International Conference on Emerging Technologies","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICET.2007.4516358","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 4
Abstract
This paper focuses on waveform analysis and crosstalk peak estimation at far-end of victim line for simultaneously switching inputs with resistive drivers. A transmission line based low loss coupled ALC-model of interconnect is used for analytical purpose. Positive and negative peaks are estimated for the conditions when inputs to two coupled interconnects are switching in-phase and out-of-phase. Waveforms are analyzed in general with homogeneous and non-homogeneous drivers for unipolar inputs. The driver is modeled as linear resistance. Comparison of analytical results with SPICE extracted results shows that the error involved is less than 2% and 5% for in-phase and out-of- phase switching respectively. The comparisons of analytically obtained results with SPICE simulations show that the proposed model captures noise peaks and waveform shape quite well.