Construction and testing of the JET divertor coils inside the vacuum vessel

15th IEEE/NPSS Symposium on Fusion Engineering - Supplement, Pub Date : 1993-10-11 DOI:10.1109/SFE.1993.472782

A. Tesini, E. Bertolini, N. Dolgetta, J. Last, P. Presle, G. Sannazzaro, J. Tait, G. Dal Mut, C. D'Urzo, A. Laurenti, A. Maragliano

引用次数: 2

Abstract

The JET tokamak magnetic system has been enhanced by adding four resistive magnets inside the vacuum vessel to produce divertor plasmas. In factory the coil parts were manufactured and process techniques qualified. Assembly took place at JET, inside the vacuum vessel, including welding into Inconel casings and impregnation with epoxy resin.

查看原文本刊更多论文

真空容器内JET分流器线圈的建造和测试

通过在真空容器内增加四个电阻磁体来产生分流等离子体，JET托卡马克磁系统得到了增强。在工厂中，线圈零件已生产完成，工艺技术合格。组装在JET真空容器内进行，包括焊接到铬镍铁合金外壳和环氧树脂浸渍。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

15th IEEE/NPSS Symposium on Fusion Engineering - Supplement,

自引率

0.00%

发文量