The effect of medical biodegradable magnesium alloy in vivo degradation and bone response in a rat femur model with long-term fixation.

Abstract

Background: It is of great significance to understand the effect of the different corrosion behaviors of magnesium (Mg) alloys manufactured using different casting methods and implanted with different methods on the long-term implantation to expand the application of Mg-based biomedical implants.

Objective: The effects of four different casting and rolling speeds on the microstructure of an Mg-rare earth (Mg-Re) alloy were analyzed using electron backscatter diffraction (EBSD).

Method: Four Mg alloys were obtained using vertical two-roll casting (TRC) at 10 m/min, 16 m/min, 24 m/min, and 30 m/min, and their microstructure, corrosion behavior and bone reaction in vivo were studied.

Results: The corrosion resistance of the alloy increases with an increase in casting speed and finer grain size of the cast-rolled parts. The Mg-Re alloys with TRC-10 m/min and TRC-30 m/min were selected for animal experiments. The two Mg alloys were made into metal rods and inserted into the rat femur to simulate the effect of Mg-Re on femoral healing under an injury condition. The rods were implanted for a long time to judge the effects of the Mg-Re alloy on the body. The TRC-30 m/min implants obtained highly mature new bone tissue in the case of bone injury.

Conclusion: The in vivo experiments showed that the corrosion resistance of the TRC-30 m/min implant was better than that of the TRC-10 m/min implant. After 32 weeks of implantation, there were no pathological changes in the liver, heart, or kidney of rats in the TRC-30 m/min group, and the cell structure was normal.